Description

8778523 Hoppe Automatic Top Extension with Roller Pins.

#8778523  Hoppe Automatic Top Extension, HLS-9000 Series with Roller Pin – No Shoot bolt, 16mm Faceplate, Roller Pin Version. For Automatic lock replacement on door panels between 79 1/8″ – 92 1/2″ O.A.

Hoppe multipoint door locks are the best multi point lock to have installed on your French door. The multipoint lock bodies are made of stainless steel and are great for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust in seacoast conditions. In the future when you change your locks, Hoppe is a great brand to go with.

• It is also important for you to replace your house or condo locks especially if you live near the ocean because of these reasons:

• Salt can rot the wood and does damage to locks as well if not cleaned and serviced periodically.

• Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks

• Approved for Hurricane HVHZ zones in Florida Miami-Dade Counties

• Easily open and close your door with minimal effort.

Advantages of the Hoppe 8778523 Automatic Lock Top Extension.

Hoppe multipoint door lock are the absolute best multi point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust out in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.

• Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
• Approved for Hurricane HVHZ zones
• Easily open and close your door with minimal effort.

• Component Specifications:

Below are the exact details of this particular Hoppe automatic multipoint lock component.

Brand:        Hoppe

Series:          HLS-9000, Handle Above European Profile Cylinder

Configuration:      Top Extension, Hoppe HLS-9000 multipoint automatic lock

Component:              Automatic Lock Top Extension

Model Number:        8778523

MPN/SKU:                  8778523

Activation:            Automatic, Multi-points activate when door closes, Turn thumb turn to lock securely.

Faceplate Width:      16mm (5/8″)

Handle Height:     36″ From Bottom of Door to Center of Handle.

Backset:   This part works on all Hoppe automatic lock backsets, with 16mm faceplate.

PZ Dimension:    92mm (3 5/8″) Center of Handle to Center of Key Hole.

Dead Bolt Throw:   N/A    Refer to Automatic Lock Gear Specifications

Multi-Point Lock Gear Position:  Roller Pin @ 750mm ( 29 1/2″) Down from Handle  or   6 1/2″ up from bottom of door.

Bottom Roller Position:     N/A

Roller Release trigger:   42 1/2″ up from bottom of the door on all top extensions

Trimmable:   Yes, Maximum Cutoff 60mm (2 3/8″)

Locking Points: Measured from the Bottom of the door, up to the center of each locking point.

For Door Panel Heights ranging from:   79 1/8″ – 92 1/2″  tall door panels

Bottom Shootbolt:       No, Not on Hoppe Automatic Locks

Lock Point #1:              Roller Pin @ 6 7/16″ from the bottom of the door panel to the center of the roller pin.

Lock Trigger:               Roller Pin Trigger is located @ 42 1/2″ up from bottom of the door panel, to the center of the release trigger.

Lock Point #2               Roller Pin @   80 5/8″   From the bottom of the door to the center of the top roller pin.

Top Shootbolt:             No, Not on Hoppe Automatic Locks

Click on the “Part Number” to take you to the product page.

Replacement for Fuhr Automatic Lock systems.

When multipoint door locks fail, you may have a difficult time locking and securing your home. Hoppe locks are a specialty lock and cannot be found at the local hardware store. Integral Windstorm Products is a proud dealer and distributor of Hoppe Multi-point door locks. Hoppe locks are sold through authorized dealers only. The problem with online purchases of multipoint locks are the availability. When you purchase a lock online, it still may take 2-6 weeks to receive your lock. Hoppe makes all of their multipoint locking systems to order. So if the dealer that sold you the lock doesn’t have it in stock, they will order it.

We try to keep Hoppe Automatic lock products in stock for you to order.

Multipointdoorlocks.com will always try to keep the most popular units in stock. Due to sporadic high volume orders coming in nationally, we do run out occasionally. We do our best effort to avoid this, but it happens. Hoppe manufactures all products to order and can have a lead time of 2-3 weeks. Some items that are not kept in stock, have to be ordered directly from Hoppe and shipped to you.

If you are having problems finding a Hoppe Automatic Multipoint Lock or Top Extensions, Please fill out the questionnaire below. We are here to help.