8778751 Hoppe Manual Round Bolt Lock with Shootbolt

$189.78

8778751 Hoppe Manual Round Bolt Lock with Bottom Shootbolt.

 

Available on backorder

Description

8778751 Hoppe Manual Round Bolt with Shootbolt with Round Bolt at 11 9/16″

Hoppe Manual Round Bolt Lock with Shootbolt – HLS-9000 Series  -16mm Faceplate, Round Bolt @ 11 9/16″ from bottom. 35mm Backset, 25mm deadbolt throw.

If you are not sure about the Manual Lock Gear with Round Bolt and Bottom Shootbolt

or lock components you need,         Click Here to have us help you find them.

 

Hoppe multipoint round bolt locks are some of the absolute best multi point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.

Hoppe automatic lock for weather shield lock repairTherma tru doors with Hoppe multipoint tongue lock with bottom shootboltHurd peachtree and weather shield french doors with Hoppe multipoint tongue locks with shootbolts

  • It is also important for you to replace your house or condo locks especially if you live near the ocean because of these reasons:
  • Salt can rot the wood and does damage to locks as well if not cleaned and serviced periodically.
  • Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
  • Approved for Hurricane HVHZ zones in Florida Miami-Dade Counties
  • Easily open and close your door with minimal effort.
  • Repairs Locks on Weather Shield Hurd Kolbe Thermatru Therma-Tru Therma tru Peachtree doors with multipoint door locks with Hoppe manual tongue locks with shootbolts.

#8778751 – Component Specifications:

Below are the exact details of this particular Hoppe Manual Round Bolt Lock with Shootbolt component. Other variations are available.

Component Details

Brand:   Hoppe Series:  HLS-9000, Handle Above European Profile Cylinder
Configuration: Multi-point Round Bolt Lock with Shootbolt
Component:  Locking Gear
Model Number:    8778751
Activation:  Manual, Lift handle to engage shootbolt, Turn thumb turn to lock securely.
Faceplate Width: 16mm (5/8″)
Lock Points:   Round Bolt locking point at 11 9/16″ from bottom of the door panel, Shootbolt Locking Points at Top and Bottom
Handle Height:  36″ From Bottom of Door to Center of Handle.
Backset:   35mm (1 3/8″)  Measurement from Edge of Door to Center of Handle
PZ Dimension:    92mm (3 5/8″) Center of Handle to Center of Key Hole.
Dead Bolt Throw:   25mm ( 1″) Center of Handle to Center of Key Hole.
Multi-Point Position:      11 9/16″ up from bottom of the door
Door Brands Used on:     Weather Shield, Peachtree, Hurd, Kolbe, Caradco, LaFinestra, Fleetwood, Therma-Tru

 

  • Shoot bolt extends when door handle is lifted and lock is engaged.
  • Turn thumb turn to lock
  • Combine Top Extension with Gear for complete lock
  • Faceplate width: 16 mm
  • Mid extension does not have any locking points,
  • Top extension does not have any locking points, Only locks with top shootbolt
  • Handle height: 36” [914 mm]
  • Lock Gear length: 37.6” [955 mm]
  • Gear length + top extension length = overall length

Variations available:

Activation Type:  Manual Activation Only

Faceplate Widths:  16mm (5/8″) and 20mm (3/4″)

Backset Variations:       Hoppe only offers the following (4) Backsets – 35mm (1 3/8″) ,  45mm (1 3/4″) ,  60mm  (2 3/8″) and  70mm (2 3/4″).

 

Click on the   “Part Number”  below to take you to the product page.

 

Part Number Lock Part Locking Point Extension Length Description
8778611 Top Extension Shootbolt    15 3/4″ O.A – Can be trimmed up to 3 15/16″ 400mm (15.75) M / 400 / SB1 / 16-SC / 20 / 100
8778615 Top Extension Shootbolt   18 3/4″ O.A – Can be trimmed up to 3 15/16″ 475mm (18.70) M / 475 / SB1 / 16-SC / 20 / 100
8778619 Top Extension Shootbolt   21 5/8″ O.A – Can be trimmed up to 3 15/16″ 550mm (21.65) M / 550 / SB1 / 16-SC / 20 / 100
8778623 Top Extension Shootbolt   24 5/8″ O.A – Can be trimmed up to 3 15/16″ 625mm (24.61) M / 625 / SB1 / 16-SC / 20 / 100
8778627 Top Extension Shootbolt   27 9/16″ O.A – Can be trimmed up to 3 15/16″ 700mm (27.56) M / 700 / SB1 / 16-SC / 20 / 100
8778631 Top Extension Shootbolt   30 1/16″ O.A – Can be trimmed up to 3 15/16″ 775mm (30.51) M / 775 / SB1 / 16-SC / 20 / 100
3389488 Top Extension Shootbolt   33 7/16″ O.A – Can be trimmed up to 3 15/16″ 850mm (33.46) M / 850 / SB1 / 16-SC / 20 / 100
3389517 Top Extension Shootbolt   36 7/16″ O.A – Can be trimmed up to 3 15/16″ 925mm (36.42) M / 925 / SB1 / 16-SC / 20 / 100
Part Number                     Lock Part                             Locking Point                                                                                                                                                           Extension Length                          Description                                                                                
3537057 Middle Extension Roundbolt       @ 50 3/4″   From Bottom of the Door to Center of Round Bolt 466mm   ( 18 3/8″ ) M / 466 / RB1 / 375 / 16-SC / K/ZC
8778739 Middle Extension Roundbolt       @ 59 5/8″   From Bottom of the Door to Center of Round Bolt 691mm    ( 27 3/16″ ) M / 691 / RB1 / 600 / 16-SC / K/ZC
8778743 Middle Extension Roundbolt       @ 77 3/8″   From Bottom of the Door to Center of Round Bolt 1141mm    ( 44 15/16″ ) M / 1141 / RB1 / 1050 / 16-SC / K/ZC
8778747 Middle Extension Roundbolt       @ 95 1/16″   From Bottom of the Door to Center of Round Bolt 1591mm    (  62 5/8″ ) M / 1591 / RB1 / 1500 / 16-SC / K/ZC
Part Number Lock Part Locking Point Backset Description
8778751 Gear Roundbolt  @ 11 9/16″ From Bottom of the Door to the Center of the Round Bolt   +  Bottom Shootbolt 35mm    (  1 3/8″ ) M/35/25 / 914 / RB1SB1 / 620 / 16-SC / 20
8778755 Gear Roundbolt  @ 11 9/16″ From Bottom of the Door to the Center of the Round Bolt   +  Bottom Shootbolt 45mm    ( 1 3/4″ ) M/45/25 / 914 / RB1SB1 / 620 / 16-SC / 20
2485283 Gear Roundbolt  @ 11 9/16″ From Bottom of the Door to the Center of the Round Bolt   +  Bottom Shootbolt 60mm    ( 2 3/8″ ) M/60/25 / 914 / RB1SB1 / 620 / 16-SC / 20
2875118 Cover Plate N/A N/A 37×16 mm


Where to Buy Hoppe 8778751 Manual  Multipoint Round Bolt Locking System.

Hoppe multipoint door lock are the absolute best multi point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust out in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.

  • Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
  • Approved for Hurricane HVHZ zones
  • Easily open and close your door with minimal effort.

 

If you are having problems finding your locks and components, Please fill out the questionnaire below. We are here to help.

Multipoint Lock Questionnaire Form
This is necessary to determine which manufacturer and series you will need.
Example: Black, Stainless steel, Goldtone
The "faceplate" is the metal strip on the entire edge of the door. It is the lock strip plate that the dead bolt and striker engages through.
If you found a symbol and do not know what it is, Select "Found a Symbol, Not Sure"

 

Additional information

Weight 7 lbs
Dimensions 43 × 5 × 5 in
Manufacturer

Hoppe

Product Number

8778751

Series

HLS-9000 Series

Lock Engagement

Manual Engagement

Locking Point

Round Bolt with Bottom Shootbolt

Backset Width

35mm – 1 3/8"" measured from edge of door to center of handle

PZ Measurement

92mm – 3 5/8" measured from center of handle to center of keyhole

Deadbolt Throw

25mm – 1" projection

Faceplate Width

16mm – 5/8" wide

Handle Height

36" from bottom of door panel to center of handle

Bottom Shootbolt

Yes, Lock gear has shootbolt that engages into the sill locking point

Round Bolt Location

11 9/16 from bottom of door up to center of tongue

Return Policy

Please be absolutely sure of the lock components you are seeking and read all the specifications before placing your order. Hoppe manufactures all components to order, therefore does not accept returns. All sales are finale and returns are not accepted.

error: Alert: Content is protected !!