Description
11517463 Hoppe Manual Single Point Lock – 35mm Backset – 14mm deadbolt – Locks at Deadbolt Only
Hoppe Manual Single Point Lock – HLS-9000 Series -16mm Faceplate, 35mm Backset, 14mm deadbolt throw.
If you are not sure about the Manual Single Point Lock or lock components you need, Click Here to have us help you find them.
Hoppe multipoint roller pin locks are some of the absolute best multi point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.
-
It is also important for you to replace your house or condo locks especially if you live near the ocean because of these reasons:
-
Salt can rot the wood and does damage to locks as well if not cleaned and serviced periodically.
-
Easily open and close your door with minimal effort.
-
Repairs Single Point Locks only, will not work as a multi-point gearbox replacement
#11517463 – Component Specifications:
Below are the exact details of this particular Hoppe Manual Single Point Locks component. Other variations are available.
Component Details
Brand: Hoppe Series: HLS-9000, Handle Above European Profile Cylinder
Configuration: Single Point Lock – Locks at deadbolt only
Component: Single Point Lock with faceplate
Model Number: 11517463
Backset: 35mm (1 3/8″) Measurement from Edge of Door to Center of Handle
Dead Bolt Throw: 14mm ( 1/2″) Center of Handle to Center of Key Hole.
Activation: Manual, Lift handle to engage , Turn thumb turn to lock deadbolt securely.
Faceplate Width: 16mm (5/8″)
Lock Points: Deadbolt Only, No other locking points
Handle Height: 35″ – 37″ From Bottom of Door to Center of Handle is Typical.
Door Brands Used on: Weather Shield, Jeld-Wen, Sierra Pacific, Peachtree, Hurd, Kolbe, Therma-Tru
Single Point Mortise Lock, Uses European Profile Cylinder, Locks at Deadbolt Only.
Hoppe Single Point Lock – HLS-9000 Series
Gear Lock Points: Deadbolt only, Cannot be used to repair multipoint lock gearbox
Where to Buy Hoppe 11517463 Manual Single Point Locking System.
Hoppe Single Point door lock are the absolute best lock to have installed on your door. The Hoppe Single Point lock bodies are made of stainless steel and is perfect solution if you want to use Hoppe handle sets with European lock cylinders.
- Uses 92mm handle sets
- Easily open and close your door with minimal effort.
Click on the “Part Number” below to take you to the product page.
Part Number Lock Part Locking Point Backset Dead Bolt Throw Description
11517463 Single Point Dead Bolt 35mm (1 3/8″) 14mm (1/2″) M/35/14 / 16-RC / W-SPERR
11517487 Single Point Dead Bolt 45mm (1 3/4″) 14mm (1/2″) M/45/14 / 16-RC / W-SPERR
11517475 Single Point Dead Bolt 35mm (1 3/8″) 25mm (1″) M/35/25 / 16-RC / W-SPERR
11517499 Single Point Dead Bolt 45mm (1 3/4″) 25mm (1″) M/45/25 / 16-RC / W-SPERR
11517505 Single Point Dead Bolt 60mm (2 3/8″) 25mm (1″) M/60/25 / 16-RC / W-SPERR
11517517 Single Point Dead Bolt 70mm (2 3/4″) 25mm (1″) M/70/25 / 16-RC / W-SPERR
We try to keep Hoppe lock products in stock for you to order.
Multipointdoorlocks.com will always try to keep the most popular units in stock. Due to sporadic high volume orders coming in nationally, we do run out occasionally. We do our best effort to avoid this, but it happens. Hoppe manufactures all products to order and can have a lead time of 2-3 weeks. Some items that are not kept in stock, have to be ordered directly from Hoppe and shipped to you. Single Point Locks are a stock item at Hoppe and usually ship out immediately.
If you are having problems finding your locks and components, Please fill out the questionnaire below. We are here to help.
