Hoppe In-active 2 Point Locks

Hoppe 2 Point In-Active Lock – Steps to take before ordering your replacement lock.

Step #1 – Find Your Backset

Measure your existing Swing Hook Lock and determine the “Back Set”. The back set is the measurement of the distance from the edge of your door to the center of the handle. The only backsets available from Hoppe are:

• 35mm or 1 3/8 Inches
• 45mm 0r 1 3/4 Inches (The Most Common Backset)
• 60mm or 2 3/8 Inches
• 70mm or 2 3/4 Inches

Once you know the “Backset” and “Handle Height”, You should be able to find the proper Hoppe Inactive Lock below

Below are the available options for Hoppe In-active 2 point Locks. Please select your lock below and click on the link, you will be taken to the product page of the lock you have selected. There you can read the specifications and purchase your lock replacement. Locks are separated into available backsets measurements.

Hoppe In-Active 2 point locks. This lock only locks at the bottom shootbolt.

There are No Edge locking points on the door edge. It only locks into the frame at the top and bottom of the door panel.

Click on the   “Part Number”  below to take you to the product page.