11517463 Hoppe Manual Single Point Lock – 35mm Backset – 14mm deadbolt

$7.43

11517463 Hoppe Single Point Lock  35mm backset, 14mm deadbolt

 

Available on backorder

Description

11517463 Hoppe Manual Single Point Lock – 35mm Backset – 14mm deadbolt – Locks at Deadbolt Only

Hoppe Manual Single Point Lock  – HLS-9000 Series  -16mm Faceplate,  35mm Backset, 14mm deadbolt throw.

If you are not sure about the Manual Single Point Lock or lock components you need,         Click Here to have us help you find them.

 

Hoppe multipoint roller pin locks are some of the absolute best multi point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.

Hoppe automatic lock for weather shield lock repairTherma tru doors with Hoppe multipoint tongue lock with bottom shootboltHurd peachtree and weather shield french doors with Hoppe multipoint tongue locks with shootbolts

  • It is also important for you to replace your house or condo locks especially if you live near the ocean because of these reasons:
  • Salt can rot the wood and does damage to locks as well if not cleaned and serviced periodically.
  • Easily open and close your door with minimal effort.
  • Repairs Single Point Locks only, will not work as a multi-point gearbox replacement

 

#11517463 – Component Specifications:

Below are the exact details of this particular Hoppe Manual Single Point Locks component. Other variations are available.

Component Details

Brand:                        Hoppe Series: HLS-9000, Handle Above European Profile Cylinder
Configuration:           Single Point Lock – Locks at deadbolt only
Component:               Single Point Lock with faceplate
Model Number:           11517463
Backset:                      35mm (1 3/8″)  Measurement from Edge of Door to Center of Handle
Dead Bolt Throw:       14mm ( 1/2″) Center of Handle to Center of Key Hole.
Activation:                  Manual, Lift handle to engage , Turn thumb turn to lock deadbolt securely.
Faceplate Width:        16mm (5/8″)
Lock Points:                Deadbolt Only, No other locking points
Handle Height:            35″ – 37″ From Bottom of Door to Center of Handle is Typical.
Door Brands Used on:     Weather Shield, Jeld-Wen, Sierra Pacific, Peachtree, Hurd, Kolbe, Therma-Tru

 

Hoppe single point lock replacement           Single Point Mortise Lock, Uses European Profile Cylinder, Locks at Deadbolt Only.

Hoppe Single Point Lock – HLS-9000 Series

Gear Lock Points:                Deadbolt only, Cannot be used to repair multipoint lock gearbox

 

Where to Buy Hoppe 11517463 Manual  Single Point Locking System.

Hoppe Single Point door lock are the absolute best lock to have installed on your door. The Hoppe Single Point lock bodies are made of stainless steel and is perfect solution if you want to use Hoppe handle sets with European lock cylinders.

  • Uses 92mm  handle sets
  • Easily open and close your door with minimal effort.

Click on the   “Part Number”  below to take you to the product page.

Part Number                               Lock Part                     Locking Point                                Backset                                    Dead Bolt Throw                                        Description
11517463                                  Single Point                   Dead Bolt                                       35mm (1 3/8″)                                14mm (1/2″)                                      M/35/14 / 16-RC / W-SPERR
11517487                                  Single Point                   Dead Bolt                                       45mm (1 3/4″)                                14mm (1/2″)                                      M/45/14 / 16-RC / W-SPERR
11517475                                  Single Point                   Dead Bolt                                       35mm (1 3/8″)                                25mm (1″)                                         M/35/25 / 16-RC / W-SPERR
11517499                                  Single Point                   Dead Bolt                                       45mm (1 3/4″)                                25mm (1″)                                         M/45/25 / 16-RC / W-SPERR
11517505                                  Single Point                   Dead Bolt                                       60mm (2 3/8″)                                25mm (1″)                                         M/60/25 / 16-RC / W-SPERR
11517517                                  Single Point                   Dead Bolt                                       70mm (2 3/4″)                                25mm (1″)                                         M/70/25 / 16-RC / W-SPERR

 

We try to keep Hoppe lock products in stock for you to order.

Multipointdoorlocks.com will always try to keep the most popular units in stock. Due to sporadic high volume orders coming in nationally, we do run out occasionally. We do our best effort to avoid this, but it happens. Hoppe manufactures all products to order and can have a lead time of 2-3 weeks. Some items that are not kept in stock, have to be ordered directly from Hoppe and shipped to you. Single Point Locks are a stock item at Hoppe and usually ship out immediately.

If you are having problems finding your locks and components, Please fill out the questionnaire below. We are here to help.

Multipoint Lock Questionnaire Form
This is necessary to determine which manufacturer and series you will need.
Example: Black, Stainless steel, Goldtone
The "faceplate" is the metal strip on the entire edge of the door. It is the lock strip plate that the dead bolt and striker engages through.
If you found a symbol and do not know what it is, Select "Found a Symbol, Not Sure"

 

Additional information

Weight 7 lbs
Dimensions 43 × 5 × 5 in
Manufacturer

Hoppe

Product Number

11517463

Series

HLS-9000 Series

Lock Engagement

Manual Engagement

Locking Point

Deadbolt Only

Backset Width

35mm – 1 3/8" measured from edge of door to center of handle

Deadbolt Throw

14mm – 1/2" projection

PZ Measurement

92mm – 3 5/8" measured from center of handle to center of keyhole

Faceplate Width

16mm – 5/8" wide

Handle Height

36" from bottom of door panel to center of handle

Return Policy

Please be absolutely sure of the lock components you are seeking and read all the specifications before placing your order. Hoppe manufactures all components to order, therefore does not accept returns. All sales are finale and returns are not accepted.

error: Alert: Content is protected !!