3814747 Hoppe Manual Tongue Lock with Shootbolt

$194.78

3814747 Hoppe Swing Hook Lock with Shootbolt.

 

Available on backorder

Description

3814747 Hoppe Manual Swing Hook Lock with Shootbolt, swing hook at 11 9/16″

Hoppe Manual Swing Hook Lock with Shootbolt – HLS-9000 Series  -16mm Faceplate, Swing Hook @ 11 9/16″ from bottom. 35mm Backset, 25mm deadbolt throw.

If you are not sure about the Manual Lock Gear with Swing Hook and Bottom Shootbolt

or lock components you need,         Click Here to have us help you find them.

 

Hoppe 3814747 multipoint Swing Hook locks are some of the absolute best multi point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.

Hoppe automatic lock for weather shield lock repairTherma tru doors with Hoppe multipoint tongue lock with bottom shootboltHurd peachtree and weather shield french doors with Hoppe multipoint tongue locks with shootbolts

  • It is also important for you to replace your house or condo locks especially if you live near the ocean because of these reasons:
  • Salt can rot the wood and does damage to locks as well if not cleaned and serviced periodically.
  • Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
  • Approved for Hurricane HVHZ zones in Florida Miami-Dade Counties
  • Easily open and close your door with minimal effort.
  • Repairs Locks on Weather Shield Hurd Kolbe Thermatru Therma-Tru Therma tru Peachtree doors with multipoint door locks with Hoppe manual tongue locks with shootbolts.

#3814747 – Component Specifications:

Below are the exact details of this particular Hoppe Manual Tongue Lock with Shootbolt component. Other variations are available.

Hoppe Swing Hook Lock Component Details

Brand:                                 Hoppe Series:  HLS-9000, Handle Above European Profile Cylinder
Configuration:                    Multi-point Swing Hook Lock with shootbolt
Component:                        Locking Gear
Model Number                    3814747
Activation:                           Manual, Lift handle to engage shootbolt, Turn thumb turn to lock securely.
Faceplate Width:                16mm (5/8″)
Lock Points:                        Swing Hook locking point 11 9/16″ from bottom, Shootbolt Locking Points at Top and Bottom
Handle Height:                     36″ From Bottom of Door to Center of Handle.
Backset:                               35mm (1 3/8″)  Measurement from Edge of Door to Center of Handle
PZ Dimension:                     92mm (3 5/8″) Center of Handle to Center of Key Hole.
Dead Bolt Throw:                 25mm ( 1″) Center of Handle to Center of Key Hole.
Multi-Point Position:            Edge Locking with Swing Hook & bottom shoot bolt
Locking Position:                 11 9/16″ up from bottom of the door
Door Brands Used on:         Weather Shield, Peachtree, Hurd, Kolbe, Caradco, LaFinestra, Fleetwood, Therma-Tru

 

Variations available:

Activation Types:  Manual Activation,  Automatic Activation and Electronic Activation.

Multipoints:           For Manual Activated multipoint lock systems, 3 Point with shootbolt, Hook bolt, Round bolt, Tongue and Roller Pin version are available.

Faceplate Widths:  16mm (5/8″) and 20mm (3/4″)

Backset Variations:       Hoppe only offers the following (4) Backsets – 35mm (1 3/8″) ,  45mm (1 3/4″) ,  60mm  (2 3/8″) and  70mm (2 3/4″).

 

Click on the   “Part Number”  below to take you to the product page.

 

2 Swing Hook Units –  1 & 2 Swing hooks above and 1 below Deadbolt Area. 

Swing Hook Lock Points:             Lower  Swing Hook locking point   @ 11 9/16”  from Bottom of the door up.
Part Number
Lock Part
Locking Point
Extension Length
Description
8778611 Top Extension   Top Shootbolt 15 3/4″ Top ShootBolt ,  – PART CAN BE TRIMMED DOWN 3 15/16″ MAX
8778615 Top Extension  Top Shootbolt 18 13/16″ Top ShootBolt ,  – PART CAN BE TRIMMED DOWN 3 15/16″ MAX
8778619 Top Extension  Top Shootbolt 21 5/8 Top ShootBolt ,  – PART CAN BE TRIMMED DOWN 3 15/16″ MAX
8778623 Top Extension  Top Shootbolt 24 5/8″ Top ShootBolt ,  – PART CAN BE TRIMMED DOWN 3 15/16″ MAX
8778627 Top Extension  Top Shootbolt 27 9/16″ Top ShootBolt ,  – PART CAN BE TRIMMED DOWN 3 15/16″ MAX
8778631 Top Extension  Top Shootbolt 30 1/2″ Top ShootBolt ,  – PART CAN BE TRIMMED DOWN 3 15/16″ MAX
Part Number
Lock Part
Locking Point
Extension Length    
Locking Point locations, From Bottom of Door Panel
3622868 Middle Extension 1 Swing Hook 24 1/16″ Swing Hook @  55 5/8″   From Bottom of Door Panel Up
3644160 Middle Extension 1 Swing Hook 39 13/16″ Swing Hook @  71 7/16″   From Bottom of Door Panel Up
3644178 Middle Extension         2 Swing Hooks          39 13/16″ Swing Hook @  55 5/8″  &  71 7/16″   From Bottom of Door Panel Up
3644186 Middle Extension         2 Swing Hooks          51 3/8″ Swing Hook @  59 5/8″  &  82 15/16″   From Bottom of Door Panel Up
3644194 Middle Extension         2 Swing Hooks          63 1/2″ Swing Hook @  59 5/8″  &  95 1/16″   From Bottom of Door Panel Up
Part Number
Lock Part
Locking Point
Backset
Dead Bolt Throw
Description
3814747 Gear Swing Hook & Shootbolt 35mm (1 38″) 25mm (1″) Swing Hook @ 11 9/16″ From Bottom of Door Panel Up
3622876 Gear Swing Hook & Shootbolt 45mm (1 3/4″) 25mm (1″) Swing Hook @ 11 9/16″ From Bottom of Door Panel Up
3660426 Gear Swing Hook & Shootbolt 60mm (2 3/8″) 25mm (1″) Swing Hook @ 11 9/16″ From Bottom of Door Panel Up
3868761 Gear Swing Hook & Shootbolt 70mm (2 3/4″) 25mm (1″) Swing Hook @ 11 9/16″ From Bottom of Door Panel Up
2875118 Cover Plate N/A N/A N/A 37×16 mm


Where to Buy Hoppe 3814747 Manual  Multipoint Tongue Locking System.

Hoppe multipoint door lock are the absolute best multi point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust out in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.

  • Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
  • Approved for Hurricane HVHZ zones
  • Easily open and close your door with minimal effort.

Multipoint locks and what to do if they happen to fail.

When multipoint door locks fail, you may have a difficult time locking and securing your home. Hoppe locks are a specialty lock and cannot be found at the local hardware store. Integral Windstorm Products is a proud dealer and distributor of Hoppe Multi-point door locks. Hoppe locks are sold through authorized dealers only. The problem with online purchases of multipoint locks are the availability. When you purchase a lock online, it still may take 2-6 weeks to receive your lock. Hoppe makes all of their multipoint locking systems to order. So if the dealer that sold you the lock doesn’t have it in stock, they will order it.

We try to keep Hoppe lock products in stock for you to order.

Multipointdoorlocks.com will always try to keep the most popular units in stock. Due to sporadic high volume orders coming in nationally, we do run out occasionally. We do our best effort to avoid this, but it happens. Hoppe manufactures all products to order and can have a lead time of 2-3 weeks. Some items that are not kept in stock, have to be ordered directly from Hoppe and shipped to you.

If you are having problems finding your locks and components, Please fill out the questionnaire below. We are here to help.

Multipoint Lock Questionnaire Form
This is necessary to determine which manufacturer and series you will need.
Example: Black, Stainless steel, Goldtone
The "faceplate" is the metal strip on the entire edge of the door. It is the lock strip plate that the dead bolt and striker engages through.
If you found a symbol and do not know what it is, Select "Found a Symbol, Not Sure"

 

Additional information

Weight 7 lbs
Dimensions 43 × 5 × 5 in
Manufacturer

Hoppe

Product Number

3814747

Series

HLS-9000 Series

Lock Engagement

Manual Engagement

Locking Point

Swing Hook and Shootbolt

Backset Width

35mm – 1 3/8" measured from edge of door to center of handle

PZ Measurement

92mm – 3 5/8" measured from center of handle to center of keyhole

Deadbolt Throw

25mm – 1" projection

Faceplate Width

16mm – 5/8" wide

Handle Height

36" from bottom of door panel to center of handle

Bottom Shootbolt

Yes, Lock gear has shootbolt that engages into the sill locking point

Tongue Location

11 9/16 from bottom of door up to center of swing hook

Return Policy

Please be absolutely sure of the lock components you are seeking and read all the specifications before placing your order. Hoppe manufactures all components to order, therefore does not accept returns. All sales are finale and returns are not accepted.

error: Alert: Content is protected !!