8779291 Hoppe Manual Roller Pin Lock – with bottom Shootbolt

$187.43

8779291 Hoppe Roller Pin Lock @ 23″ from Bottom. With Bottom Shootbolt 45mm backset, 25mm deadbolt

 

Available on backorder

Description

8779291 Hoppe Manual Roller Pin Lock – With Shootbolt, Roller Pin at 23″ from Bottom of door

Hoppe Manual Roller Pin Lock with Bottom Shootbolt – HLS-9000 Series  -16mm Faceplate, Roller Pin @ 23″ from bottom. 45mm Backset, 25mm deadbolt throw.

If you are not sure about the Manual Lock Gear with Roller Pin and Bottom Shootbolt

or lock components you need,         Click Here to have us help you find them.

 

Hoppe multipoint roller pin locks are some of the absolute best multi point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.

Hoppe automatic lock for weather shield lock repairTherma tru doors with Hoppe multipoint tongue lock with bottom shootboltHurd peachtree and weather shield french doors with Hoppe multipoint tongue locks with shootbolts

  • It is also important for you to replace your house or condo locks especially if you live near the ocean because of these reasons:
  • Salt can rot the wood and does damage to locks as well if not cleaned and serviced periodically.
  • Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
  • Approved for Hurricane HVHZ zones in Florida Miami-Dade Counties
  • Easily open and close your door with minimal effort.
  • Repairs Locks on Weather Shield Hurd Kolbe Thermatru Therma-Tru Peachtree doors with multipoint door locks with Hoppe manual tongue locks.

 

#8779291 – Component Specifications:

Below are the exact details of this particular Hoppe Manual   Roller Pin Lock with Bottom Shootbolt component. Other variations are available.

Component Details

Brand:                        Hoppe Series: HLS-9000, Handle Above European Profile Cylinder
Configuration:           Multi-point Roller Pin Lock, locks at top and bottom, With Bottom Shoot Bolt
Component:               Locking Gear
Model Number:          8779291
Backset:                      45mm (1 3/4″)  Measurement from Edge of Door to Center of Handle
Dead Bolt Throw:       25mm ( 1″) Center of Handle to Center of Key Hole.
Activation:                  Manual, Lift handle to engage roller pins, Turn thumb turn to lock deadbolt securely.
Faceplate Width:        16mm (5/8″)
Lock Points:                1 Roller Pin locking point –   23″ from bottom of door, with shootbolt
Handle Height:            36″ From Bottom of Door to Center of Handle.
Door Brands Used on:     Weather Shield, Jeld-Wen, Sierra Pacific, Peachtree, Hurd, Kolbe, Therma-Tru, Replaces Fuhr Multi-point door lock

 

 

  • 1 Roller Pin shifts downwards on the lock body,  when door handle is lifted and lock is engaged.
  • Turn thumb turn to lock
  • Combine Top Extension with Gear for complete lock
  • Faceplate width: 16mm
  • Handle height: 36” [914 mm]
  • Lock Gear length: 37.6” [955 mm]

 

 

Click on the   “Part Number”  below to take you to the product page.

Hoppe HLS-9000 Multipoint Lock with Roller pin and bottom shootbolt           Only 1 Roller Pin on Lock at 11 9/16″ From bottom of door 

1 Roller Pin Locks –  1 below Deadbolt Area at 11 9/16″

Gear Lock Points:                Roller Pin locking point    11 9/16″
Part Number Lock Part Locking Point from Bottom Extension Length Description
8778611 Top Extension Shootbolt only, No Roller  400mm  –   15 3/4″ M / 400 / SB1 / 16-SC / 20 / 100
8778615 Top Extension Shootbolt only, No Roller  475mm  –    18 3/4″ M / 475 / SB1 / 16-SC / 20 / 100
8778619 Top Extension Shootbolt only, No Roller  550mm  –    21 11/16″ M / 550 / SB1 / 16-SC / 20 / 100
8778623 Top Extension Shootbolt only, No Roller  625mm  –    24 5/8″ M / 625 / SB1 / 16-SC / 20 / 100
8778627 Top Extension Shootbolt only, No Roller  700mm  –    27 9/16″ M / 700 / SB1 / 16-SC / 20 / 100
8778631 Top Extension Shootbolt only, No Roller  775mm  –    30 1/2″ M / 775 / SB1 / 16-SC / 20 / 100
8779295 Middle Extension 1 Roller @   48 15/16″     from bottom of door panel 691mm  –    27 1/4″ M / 691 / RL1 / 330 / 16-SC / K/ZC
8778823 Middle Extension 1 Roller @   59 9/16″     from bottom of door panel 691mm  –    27 1/4″ M / 691 / RL1 / 600 / 16-SC / K/ZC
2164818 Middle Extension 1 Roller @   61 5/8″     from bottom of door panel 742mm  –    29 1/4″ M / 742 / RL1 / 651 / 16-SC / K/ZC
2162396 Middle Extension 1 Roller @   68 5/8″     from bottom of door panel 920mm  –    35 1/4″ M / 920 / RL1 / 829 / 16-SC / K/ZC
8778827 Middle Extension 1 Roller @   77 5/16″     from bottom of door panel 1141mm  –   44 15/16″ M / 1141 / RL1 / 1050 / 16-SC / K/ZC
8778831 Middle Extension 1 Roller @   95 1/16″     from bottom of door panel 1591mm  –   62 5/8″ M / 1591 / RL1 / 1500 / 16-SC / K/ZC
Part Number Lock Part Locking Point Backset Dead Bolt Throw Description
8778835 Gear  1 Roller @  11 9/16″  from bottom of door panel, +  Bottom Shootbolt 35mm  –  1 3/8″ 14mm  –    1/2″ M/35/14 / 914 / RL1SB1 / 620 / 16-SC / 20
8778839 Gear  1 Roller @  11 9/16″  from bottom of door panel, +  Bottom Shootbolt 45mm  –  1 3/4″ 14mm  –    1/2″ M/45/14 / 914 / RL1SB1 / 620 / 16-SC / 20
8778843 Gear  1 Roller @  11 9/16″  from bottom of door panel, +  Bottom Shootbolt 35mm  –  1 3/8″ 25mm  –    1″ M/35/25 / 914 / RL1SB1 / 620 / 16-SC / 20
8778847 Gear  1 Roller @  11 9/16″  from bottom of door panel, +  Bottom Shootbolt  45mm  –  1 3/4″ 25mm  –    1″ M/45/25 / 914 / RL1SB1 / 620 / 16-SC / 20
2858511 Gear  1 Roller @  11 9/16″  from bottom of door panel, +  Bottom Shootbolt 60mm  –     2 3/8″ 25mm  –    1″ M/60/25 / 914 / RL1SB1 / 620 / 16-SC / 20
3924524 Gear  1 Roller @  11 9/16″  from bottom of door panel, +  Bottom Shootbolt 70mm  –    2 3/4″ 25mm  –    1″ M/70/25 / 914 / RL1SB1 / 620 / 16-SC / 20
2875118 Cover Plate N/A N/A N/A 37×16 mm

 

Where to Buy Hoppe 8779291 Manual  Multipoint Roller Pin Locking System.

Hoppe multipoint door lock are the absolute best multi point Roller Pin lock to have installed on your hurricane rated impact door. The multipoint 1 Roller Pin lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust out in seacoast conditions. In the future when you change your tongue lock, Hoppe is a great brand to go with.

  • Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
  • Approved for Hurricane HVHZ zones
  • Easily open and close your door with minimal effort.

Multipoint locks and what to do if they happen to fail.

When multipoint door locks fail, you may have a difficult time locking and securing your home. Hoppe locks are a specialty lock and cannot be found at the local hardware store. Integral Windstorm Products is a proud dealer and distributor of Hoppe Multi-point door locks. Hoppe locks are sold through authorized dealers only. The problem with online purchases of multipoint locks are the availability. When you purchase a lock online, it still may take 2-6 weeks to receive your lock. Hoppe makes all of their multipoint locking systems to order. So if the dealer that sold you the lock doesn’t have it in stock, they will order it.

We try to keep Hoppe lock products in stock for you to order.

Multipointdoorlocks.com will always try to keep the most popular units in stock. Due to sporadic high volume orders coming in nationally, we do run out occasionally. We do our best effort to avoid this, but it happens. Hoppe manufactures all products to order and can have a lead time of 2-3 weeks. Some items that are not kept in stock, have to be ordered directly from Hoppe and shipped to you.

If you are having problems finding your locks and components, Please fill out the questionnaire below. We are here to help.

Multipoint Lock Questionnaire Form
This is necessary to determine which manufacturer and series you will need.
Example: Black, Stainless steel, Goldtone
The "faceplate" is the metal strip on the entire edge of the door. It is the lock strip plate that the dead bolt and striker engages through.
If you found a symbol and do not know what it is, Select "Found a Symbol, Not Sure"

 

Additional information

Weight 7 lbs
Dimensions 43 × 5 × 5 in
Manufacturer

Hoppe

Product Number

8779291

Series

HLS-9000 Series

Lock Engagement

Manual Engagement

Locking Point

1 Roller Pin @ 23" – wit bottom Shootbolt

Roller Pin Location

23" from bottom of door up to center of Roller Pin

Backset Width

45mm – 1 3/4" measured from edge of door to center of handle

Deadbolt Throw

25mm – 1" projection

PZ Measurement

92mm – 3 5/8" measured from center of handle to center of keyhole

Faceplate Width

16mm – 5/8" wide

Handle Height

36" from bottom of door panel to center of handle

Bottom Shootbolt

Yes, Locking points are Roller Pin at 11 9/16" from bottom of door, Deadbolt and bottom shootbolt

Return Policy

Please be absolutely sure of the lock components you are seeking and read all the specifications before placing your order. Hoppe manufactures all components to order, therefore does not accept returns. All sales are finale and returns are not accepted.

error: Alert: Content is protected !!