Description

Hoppe Manual Top Extensions with Shootbolt, Tongue and Roller Pin Versions.Trimmable up to 3 15/16″, 16mm 5/8″, 3/4″ Shoot bolt extension

Hoppe Manual Top Extension with Shootbolt- HLS-9000 Series  -16mm Faceplate,  Works with all backsets and deadbolt throws. This configuration requires a Mid-extension and lock gear to complete the lock system.

If you are not sure about the Manual Top extension with shootbolt or lock components you need,         Click Here to have us help you find them.

Hoppe multipoint top extensions are some of the absolute best multi point lock components to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.

• It is also important for you to replace your house or condo locks especially if you live near the ocean because of these reasons:

• Salt can rot the wood and does damage to locks as well if not cleaned and serviced periodically.

• Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks

• Approved for Hurricane HVHZ zones in Florida Miami-Dade Counties

• Easily open and close your door with minimal effort.

• Repairs Mid-Extensions on Weather Shield Hurd Kolbe Thermatru Therma-Tru Therma tru Peachtree doors with multipoint door locks with Hoppe manual tongue Mid-Extensions.

Hoppe Top Extensions with shootbolt – Component Specifications:

Below are the exact details of this particular Hoppe Manual Tongue Lock with Shootbolt component. Other variations are available.

Component Details

Brand:   Hoppe Series: HLS-9000, Manual Activation, Top Extension with shootbolt

Configuration:   Top extension with shoot bolt, Requires Mid-Extension and lock body for a Complete system.

Component:  Top Extension

Model Number:  Works on all Manual HLS-9000 lock and mid-extensions with 16mm faceplates

Activation:  Manual, Lift handle to engage lock tongues, Turn thumb turn to lock securely.

Faceplate Width: 16mm (5/8″)

Lock Points:   Top Shootbolt

Handle Height:  36″ From Bottom of Door to Center of Handle.

Backset:   Works on all Manual Tongue Locks

Door Brands Used on:     Weather Shield, Peachtree, Hurd, Kolbe, Caradco, LaFinestra, Fleetwood, Therma-Tru

Variations available:

Activation Type:  Manual Activation

Connection:   Trimmable requires Mid-Extension,  and Direct Connect attaches directly to the lock body.

Configurations:          For Active and Inactive multipoint lock systems, 3 Point, Hook bolt, Round bolt, Tongue and Roller Pin Lock Systems.

Top Shootbolt:      All have top shootbolt that extends into the header frame 3/4″.

Faceplate Widths:  16mm (5/8″) and 20mm (3/4″)

Top Extensions with Shootbolt Only For 3 Point Locks

Click on the   “Part Number”  below to take you to the product page.

Top Extensions With Shoot bolt, Requires Cover Plate and Mid-Extension, 16mm faceplate, 3/4″ Shootbolt Throw

Top Extensions with Tongue & Shootbolt

Click on the   “Part Number”  below to take you to the product page.

Top Extensions With Tongue and Shootbolt, Not Trimmable, Connects Directly to Lock Gear,  16mm faceplate, 3/4″ Shootbolt Throw

Top Extensions with Roller Pin & Shootbolt

Click on the   “Part Number”  below to take you to the product page.

Top Extensions With Roller Pin and Shootbolt, Not Trimmable, Connects Directly to Lock Gear,  16mm faceplate, 3/4″ Shootbolt Throw

Top Extensions with Shootbolt Only for Inactive Door Panels. Sizes Are For Inactive Doors Lock Gears.

Click on the   “Part Number”  below to take you to the product page.

Inactive Manual Top Extensions With Shootbolt, Trimmable Up to 100mm (3 15/16″),    and  230mm (9″)

 Connects Directly to inactive Lock Gear or Mid-Extension on Active Door,  16mm faceplate, 3/4″ Shootbolt Throw

Where to Buy Hoppe Top Extension With Shootbolt?

Hoppe Multi-point lock to have installed on your hurricane rated impact door. The multipoint lock bodies are made of stainless steel and is perfect for any environment. We have seen many of the older multipoint lock systems such as FUHR and G.U., corrode and rust out in seacoast conditions. In the future when you change your locks Hoppe is a great brand to go with.

• Keep your home secure with weather, fault and intrusion resilient Hoppe multi-point door locks
• Purchase Mid-Extensions and Locks at  hoppelocks.com or multipointdoorlocks.com
• Approved for Hurricane HVHZ zones
• Easily open and close your door with minimal effort.

Multipoint locks and what to do if they happen to fail.

When multipoint door locks fail, you may have a difficult time locking and securing your home. Hoppe locks are a specialty lock and cannot be found at the local hardware store. Integral Windstorm Products is a proud dealer and distributor of Hoppe Multi-point door locks. Hoppe locks are sold through authorized dealers only. The problem with online purchases of multipoint locks are the availability. When you purchase a lock online, it still may take 2-6 weeks to receive your lock. Hoppe makes all of their multipoint locking systems to order. So if the dealer that sold you the lock doesn’t have it in stock, they will order it.

We try to keep Hoppe lock products in stock for you to order.

This online store is Where to Buy Hoppe HLS-9000 Manual  Multipoint Lock Top-Extensions. You can purchase Hoppe components right here  at Multipointdoorlocks.com . We will always try to keep the most popular units in stock. Due to sporadic high volume orders coming in nationally, we do run out occasionally. We do our best effort to avoid this, but it happens. Hoppe manufactures all products to order and can have a lead time of 2-3 weeks. Some items that are not kept in stock, have to be ordered directly from Hoppe and shipped to you.

If you are having problems finding your locks and components, Please fill out the questionnaire below. We are here to help.